GXB28 series Stainless Steel Wire Rope Shock Absorber Shock Absorber Vehicle Ship Airborne Buffer Vibration Isolator

Product Description
Solving Shock and Vibration Problems
Shock and vibration rank among the most destructive agents in industrial environments. These disturbances erode the life of mechanical and electronic equipment – driving machinery from service long before necessary. Sometimes this premature deterioration stems from repeated overstress loadings, sometimes from fatigue failures of vital parts, and sometimes from a combination of both.
Kacise offers a variety of wire rope isolators that resolve shock and vibration issues in virtually any application. By selecting wire rope with the proper characteristics – wire diameter, number of strands, cable length, cable twist or lay, and the number of cables per section, we have created wire rope isolators that provide superior equipment protection. Ideally, passive isolation systems require no maintenance, use little space, and keep functioning under varying temperatures and in corrosive environments.
Product Size Chart

Press Fit Test Data Sheet

45° Inclined Press Fitting Load Test Data Sheet

Shear Rolling Load Test Data Sheet

Wire rope vibration isolators have the following advantages:

• Rugged, metal construction
• Low frequency, highly damped vibration isolation
• Excellent shock attenuation
• Wide temperature range, -200°F to +650°F
• Fail-safe construction
• Maintenance-free

Product structure diagram

Guide for installation of wire rope isolator
1. Before installation, please carefully check whether the mounting hole matches the mounting hole of the vibration isolator, such as whether the thread is the same, etc.
2, the installation hole is clean, there is no burr, rust, damage and other defects.
3. Since the vibration isolator is an elastic component, it needs a little movable space when working. Before installation, please carefully check whether there is any equipment affecting installation in the installation part and whether the movable space of the vibration isolator is enough. Please check whether the vibration isolator is in good condition and has no defects before installation.
4. Prepare a suitable screwdriver and crowbar.
5, first install the isolator to heavy equipment or fixed equipment, installation screws do not need to tighten, so that the isolator can be slightly active.
6. Install the connecting device on the other side of the vibration isolator. If the mounting hole is slightly misaligned, you can move the vibration isolator or use a crowbar to align the mounting hole of the vibration isolator with the mounting hole of the equipment, and then screw the fixing screw.
7. After fixing the device position, tighten all the fixing screws.
Application

GXB28 series Stainless Steel Wire Rope Shock Absorber Shock Absorber Vehicle Ship Airborne Buffer Vibration Isolator Images